TRIGGER ACS下载 - TRIGGER ACS苹果应用下载

基本信息

更新日期:: 2021-02-20
版本:: 1.3
大小:: 12.1 MB
类型:: 工具
平台:: iOS

评分:
发布日期:: 2017-12-07
价格:: 免费
开发者:: Advanced Accessory Concepts

TRIGGER ACS应用截图

TRIGGER ACS应用简介

The Trigger Accessory Control System substantially saves installation time of your electronic accessories! Eliminate the need to run wires under the dash or through the firewall of your vehicle when running wires.

Our Bluetooth App will control on/off and dimming functions as well as flashing when used with LED or conventional lighting. It is simple to set up and allows for user customization. Use the app to “Trigger” lights from outside the vehicle whenever you might need to activate an accessory on demand.

In addition to the app, Trigger includes an RF remote control for activating installed accessories from outside the vehicle and dimming/flashing functions for installed lighting. In addition, two 30 amp and two 10 amp fused circuits with LED indicators notify you of blown fuses.

App Setup Instructions:

1. Ensure Bluetooth is active on your mobile device, and the Trigger Controller is powered on.
2. Once downloaded and installed, tap the Trigger icon to launch the app. Bluetooth pairing occurs automatically, there is no need to manually pair the App.
3. Once the App is running, tap the ‘GO’ button in the middle of the screen to connect to your Trigger Controller.
4. After a few seconds, the App will connect. Power, strobe, and dimming functionality will now be active.
5. Tap the ‘Settings’ icon to customize the names of your Trigger connected accessories. Tap ‘Save’ to save the customized names.
6. Tap ‘Home’ to return to the main App screen.

For product support and training videos, visit http://triggercontroller.com/support.html

中文翻译

触发附件控制系统大大节省了您的电子附件的安装时间!在运行电线时，无需在仪表板下或通过车辆的防火墙运行电线。

我们的蓝牙应用程序将控制开/关和调光功能，以及与LED或常规照明一起使用时闪烁。它设置简单，并允许用户自定义。每当您可能需要按需激活附件时，请使用该应用程序从车辆外部 “触发” 灯。

除应用程序外，Trigger还包括一个RF遥控器，用于从车辆外部激活已安装的附件，以及用于已安装照明的调光/闪烁功能。此外，两个30安培和两个10安培的带发光二极管指示灯的熔断电路会通知您熔断。

应用程序设置说明:

1.确保您的移动设备上的蓝牙处于活动状态，并且触发控制器已打开电源。
2.下载并安装后，点击触发器图标以启动应用程序。蓝牙配对会自动发生，无需手动配对应用程序。
3.应用程序运行后，点击屏幕中间的 “开始” 按钮以连接到触发器控制器。
4.几秒钟后，应用程序将连接。电源、频闪和调光功能现在将处于活动状态。
5.点击 “设置” 图标以自定义触发器连接附件的名称。点击 “保存” 以保存自定义名称。
6.点击 “主页” 返回主应用程序屏幕

有关产品支持和培训视频，请访问http://triggercontroller.com/support.html