Subwoofer Speaker Free
重低音喇叭呈现低音炮音箱模拟器,频率响应从30Hz至300Hz的。应用引擎响应音乐和设备,如真正的扬声器等的声音。功耗低的CPU和GPU功耗(长电池寿命)。动态壁纸应用工程风景..
基本信息
- 更新日期:
- 包名:
- com.jogi.subwooferspeakerfree
- 版本:
- 1.1
- 大小:
- 3.7M
- 类型:
- 音乐与音频
- 平台:
- 安卓
- 评分:
- 发布日期:
- 2014-06-10
- 价格:
- 免费
- 开发者:
- Jogi
Subwoofer Speaker Free应用截图
Subwoofer Speaker Free应用简介
Subwoofer Speaker is rendered subwoofer speaker emulator, frequency response from 30Hz to 300Hz.
Application engine responds to music and other sounds from device like real speaker.
Consume low CPU and GPU power (long battery life).
Live Wallpaper and application works in landscape and portrait mode, each mode has 15 separate profiles.
You can change them, according to your own preferences (create, swap, and delete).
All Access features:
– enlarge, reduce, move, and add mirror to the speaker.
– test suspension speaker, manually or automatically (finger icon or sine wave icon)
– quick configuration option from the wallpaper (quick configuration icon must be highlight,
tap the screen with three fingers on the wallpaper screen for start configuration)
– vibration (vibration icon must be highlight)
NOTE: Some device are not supported, because they have no electric motor.
– music control (music control icon must be highlight):
* play/pause: tap twice quickly into the center of the screen
* previous: tap twice quickly in the left part of the screen
* next: tap twice quickly in the right part of the screen
* stop: tap quickly left part of the screen, then center, and finally on the right part of the screen
NOTE: From version 1.3 you can choose your music player to control:
– Default by the system
– Poweramp
– Google Play Music
– Winamp
– Samsung Music Player
– Sony WALKMAN Music Player
– Stock Android Player
How to set Subwoofer Speaker on home screen long press wallpaper and choose:
Set wallpaper -> Live wallpapers -> Subwoofer Speaker -> Set wallpaper
NOTE: On some devices, the Subwoofer Speaker can not work properly.
It is caused by the built-in DSP.
Media players block audio data – android visualizer class not work properly.
If android visualizer class not working properly in your device, please do not blame my application.
Try on another device 😉
中文翻译
重低音喇叭呈现低音炮音箱模拟器,频率响应从30Hz至300Hz的。
应用引擎响应音乐和设备,如真正的扬声器等的声音。
功耗低的CPU和GPU功耗(长电池寿命)。
动态壁纸应用工程风景和肖像模式,每种模式有15个独立的配置文件。
你可以改变他们,根据自己的喜好(创建,交换和删除)。
所有接入的特点:
– 放大,缩小,移动,添加镜像到扬声器。
– 测试悬浮扬声器,手动或自动地(手指图标或正弦波图标)
– 从壁纸(快速配置图标快速配置选项必须是亮点,
轻按屏幕壁纸的启动配置上用三根手指在屏幕)
– 振动(振动图标必须是亮点)
注:某些设备不支持,因为他们没有电动马达。
– 音乐控制(音乐控制图标必须是亮点):
*播放/暂停:快速点击两次到屏幕的中心
*以前:在屏幕的左侧部分快速点击两次
*下一个:在屏幕的右侧快速敲击两次
*站:点击屏幕的右侧屏幕迅速离开的一部分,那么中心,最后
注:从版本1.3,你可以选择你的音乐播放控制:
– 默认的系统
– 后级
– 谷歌播放音乐
– Winamp的
– 三星音乐播放器
– 索尼Walkman音乐播放器
– 股票的Android播放器
如何在主屏幕上长按壁纸,然后选择设置低音炮音箱:
设置壁纸 – >动态壁纸 – >重低音喇叭 – >设置壁纸
注:在某些设备上,重低音扬声器无法正常工作。
它是通过内置的DSP造成的。
媒体播放器阻止的音频数据 – Android的可视化类不能正常工作。
如果Android的可视化类不能正常工作的设备,请不要怪我的申请。
尝试在另一台设备)